Volume: 475 ml
Water based - READY TO USE
Surface application: Walls, Wood
Base coat: Bluebird 3 in 1 Primer
For best finish apply with roller
Erasable Finish
Superior Coverage
Fast Dry

Method for DIY Beginners and Experts

Kit Required

Masking Tape
4" Roller
Sanding Paper (Raigmal)
Bluebird 3 in 1 Primer
Bluebird Chalkboard Paint

Surface Preparation

Compatible Surfaces: Walls and Wood
Incompatible Surfaces: Enamel-painted wall, Laminated wood

If the surface is pre-painted, it is important to make sure the paint is Emulsion (water-based) for it to be compatible with the water-based Chalkboard Paint. If there are any cracks or apparent flakes, it is required to scrape-off the old paint with a scraper and apply Bluebird Wall Putty to fill any void. For polished wood, it is first required to sand the surface once before moving on to the next step i.e. Priming.

Use masking tape to mark the target area and apply Bluebird 3 in 1 Primer with a 4" roller (recommended for better coverage and to avoid brush marks). Water may be mixed to achieve the required consistency (not more than 20%). One litre of primer covers 14-16 square metres and 1-2 coats are recommended depending on darkness of the base colour. After the first coat is applied, sand the surface with a sanding paper (raigmal) and then move on to the next coat with a 2 hour gap in between.

Application

Bluebird Chalkboard Paint is ready to use and can be diluted with water upto 20% to achieve the required consistency. Recommended tool of application is 4" roller. 475 ml paint covers 2 coats over 30 sqft surface. There should be a 2 hour gap between coats. It's now done! Let the surface dry for at least 24 hours after the final coat.

Cleaning

Surface can be cleaned after 24-48 hrs of application with damp cloth and is water resistant.

Chalkboard Paint

Wall Chalkboard Paint